News

Hierarchy of Hazard Control Explained

24th March 2020

According to the HSE, the client (the person responsible for implementing health and safety on their project, whether that be to introduce health and safety measures directly or employ someone to take on the duties) is required to reduce risks to individuals on-site to as far as reasonably practicable. But in situations where there are many risks involved, how should you prioritise which risks to manage first?

As CDM specialists, we utilise and develop a number of health and safety frameworks that are designed to minimise risk. We work with clients and designers to ensure we apply the most practical design risk management strategy. One of the most popular frameworks is the Hierarchy of Hazard Control.

What is the Hierarchy of Hazard Control?

The Hierarchy of Hazard control methodology helps reduce risks to the lowest reasonable practical level by taking preventative measures, in order of priority. This is what is meant by a ‘hierarchy of hazard control.’ The Hierarchy was introduced to help clients and duty holders manage the risks with a practical approach and resist the desire to manage the easiest risks first but rather manage the risks depending on whether they were likely to harm people and to what severity.

Categorising the Risk

The level of risk is categorised by the potential harm or adverse health effect that the hazard may cause, the number of times a person may potentially be exposed and the number of people who may be exposed. For example, exposure to airborne asbestos fibres will always be classified as high risk because a single exposure is all it takes to cause potentially fatal lung disease (and each additional exposure increases the likelihood), whereas the risk associated with works requiring minimal physical activity, for example, office-based work or works with minimal potential for exposure to hazardous substances with feature low risk such as the use of display screen equipment.

The list below sets out the order to follow when planning to reduce risks you have identified in the workplace.

Hierarchy of Hazard Lucion Consulting

By approaching risk in this manner and considering each of the headings in the order shown, you are encouraged to not simply jump to the easiest control measure to implement, but rather find the most powerful preventative measure. Here’s how you would work through the hierarchy.

  1. Elimination Redesign the job or substitute a substance so that the hazard is removed or eliminated.
  2. Substitution – Replace the material or process with a less hazardous one.
  3. Engineering controls – For example, use work equipment or other measures to prevent falls where you cannot avoid working at height, install or use additional machinery to control risks from dust or fumes or separate the hazard from operators by methods such as enclosing or guarding dangerous items of machinery/equipment. Give priority to measures which protect collectively over individual measures.
  4. Administrative controls – These are all about identifying and implementing the procedures you need to work safely. For example: reducing the time workers are exposed to hazards (e.g. by job rotation), prohibiting use of mobile phones in hazardous areas; increasing safety signage, and performing effective risk assessments. Conducting an effective risk assessment should follow a standard process and be a team effort:Risk Assessment Lucion Consulting
  5. Personal protective clothing and equipment – Only after all the previous measures have been tried and found ineffective in controlling risks to a reasonably practical level, must personal protective equipment (PPE) and respiratory protective equipment (RPE) be used. For example, where you cannot eliminate the risk of a fall, use work equipment or other measures.

The hierarchy of hazard control is just one of the most basic frameworks that can be implemented to keep construction sites safe (and reduce or manage residual risks – post-completion), however, at Lucion we are committed to not only implementing the safest system for each individual project but also finding the most flexible framework that keeps your project moving whilst achieving compliance and better health and safety culture for our clients and their teams.

What do the regulations say?

Under the Management of Health and Safety Work Regulations 1999, the client, duty holder or employer, is required by law to protect both your employees and other individuals from potential hazardous risks as far as reasonably practicable. As a minimum for all businesses no matter the size, you must take reasonable steps to:

  1. Identify hazards that could pose a risk of injury or illness to individuals
  2. Determine the likelihood of the hazardous risk occurring and the severity of the outcome
  3. Take reasonable steps to eliminate the risk or control the risk through control measures as far as reasonably practicable 

Our team of NEBOSH qualified Health and Safety consultants are experienced, trusted providers of CDM services and can act as your CDM Advisor for your project. Our team has worked with architects across the UK from SMEs to large international practices to provide CDM and construction safety advice.

Download a simple risk management tool to record and manage significant risk throughout the design process and identify risk post-completion: Designers Risk Register

Related Articles

View all articles ›
Asbestos Re-Inspection Surveys: Top Ten FAQs

Asbestos Re-Inspection Surveys: Top Ten FAQs

3rd April 2020

Here are our Top Ten FAQs from our clients relating to Asbestos Re-Inspection Surveys

Still Delivering Trusted Services

Still Delivering Trusted Services

2nd April 2020

Lucion Services and its subsidiary companies have taken action to ensure we continue to deliver trusted risk management services to keep your projects moving during the COVID-19 outbreak.

Continuing To Deliver Sustainable Services Through Sustainable Practices: Our Gold Standard

Continuing To Deliver Sustainable Services Through Sustainable Practices: Our Gold Standard

30th March 2020

Prestigious UK membership organisation, The Royal Society for the Prevention of Accidents (RoSPA) has once again awarded Lucion Services Gold for both Fleet and Health and Safety performance 2020.

You’ve planned for asbestos works during your modernisation project, but have you planned for air testing and monitoring?

You’ve planned for asbestos works during your modernisation project, but have you planned for air testing and monitoring?

25th March 2020

Asbestos Air monitoring and testing is a fundamental stage of the four-stage clearance. But what type of air testing should you be using?